Huge capacity transmission and capacity of modular upgrade
* Supports 96 wavelength 1-100G system transmission at C-band
* Supports a access rate of up to 100Gbit/s for single channel
* Supports a single level multiplexing/demultiplexing architecture for 80/96 wavelength
* Supports system upgrade meet the future growing demand in bandwidth
Multi-rate, multi-protocol, full-service access and convergence
* Access to SDH/SONET services, GE, 10 GE, 40 GE, 100 GE and other services of SAN, CPRI at various rate levels.
* Powerful capacity of service convergence, supporting 8xEE/GE service convergence and 10×10GE service convergence
High integration, green, convenient maintenance
* 5U frame supports 18 service slots, with a super high level of integration
* Compact structure and flexible installation, available for installation in cabinet with 300 mm depth
* Supports free-of-configuration installation, and the equipment is plug-and-play
* Supports a unified network management platform and provides a perfect performance monitoring ability in performance of network and equipment
* Lowest power consumption in the industry, assist operators to build green energy-saving network
Outstanding architecture design and secure data transmission
* It offers a variety of network level protection and provides comprehensive protection for optical fiber line
* It provides comprehensive equipment protection: power equipment protection, fan protection
* All-service transparent transmission reduces the transmission delay of circuit cross and ensures the reliability of transmission
* All optical interfaces are pluggable and reusable, which reduces the investment of spare parts
Performance Parameters |
Technical Indicators |
Product model |
3C-OTNS8600V |
Equipment size |
5U:220 mm (height)x442 mm (width)x220 mm (depth) |
Service slot |
19 slots( 1FAN card, 1 Manage Card, 2 Power Card, 15 Data Card) |
Transmission capacity of Single equipment |
64 * 1G~100G bidirectional transmission
128 * 1G~100G unidirectional transmissions |
Wavelength |
CWDM:1271nm~1611nm
DWDM:C Band, 100 GHZ or 50 GHZ |
Maximum rate of Single channel |
1~100Gbit/ s |
Transmission distance |
Upto 200km when work with EDFA. |
Service interface type |
1G~100G all kind of services, including services of
STM-1/4/16/64, OC-3/12/48/192, FE, GE, 10GE, 100GE, FC100/200/400/800/1200, FICON, ESCON,
CPRI 1/2/3/6/7 |
Clock features |
Support IEEE 1588 V2 |
Optical connector |
SFP/SFP +/CFP/QSFP28 LC type interface |
Network topology |
Point to point, chain type, star type, ring type |
Installation |
"19"and 23" cabinets, ETSI 300mm/600mm cabinets
Wireless outdoor base station cabinet, FTTx outdoor cabinet, hanging wall, derrick |
Working temperature range |
- 10 ℃~60 ℃ (typical) |
Working humidity range |
5~95% no condensation |
Storage temperature range |
-40℃~85℃ |
Heat dissipation |
Fan cooling |
Power supply mode |
AC: 90~260 V or DC: -36~-72 V (support 1+1 backup power input) |
Power consumption |
300W (typical) |
Lifetime Warranty
All the fiber optic products in 3C-LINK are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
In traditional mobile backhaul network, there is fixed latency for each transmission hop because the structure is usually back to back. In 5G era optical and electrical integrated network should be introduced to mobile bearing network. It can provide a more flattened network, which can effectively reduce the latency. And in 5G era the peak bandwidth for mobile backhaul and fronthaul will be also over 10G. WDM network must sink to the access network to guarantee the bandwidth. 3C-LINK can provide the end to end OTN solution from access network to backbone network to meet the large capacity and low latency demands in 5G era.
Figure 1:3C-LINK Compact OTN Solution
Solution Introduction & Advantages
3C-LINK compact OTN solution can provide larger capacity, multiple service access, and less cascaded equipment, which can help the operator to save cost, Compared with 10GE ring or 100GE ring, the capacity will increase 40 times, which can satisfy the bandwidth requirement of XGPON, 5G, data centers and cloud applications; It can also provide multiple service access for enterprise client, such like STM service, FC service, etc., as well as CPRI service access, which unifies fronthaul and backhaul in one box.
3C-LINK provide various products for access WDM network, the 1U/2U equipment for the access nodes, and 5U equipment for the aggregation sites; packet switch share the same switch unit, any service such like E1,STM-1/4/16/64, GE, 10GE and 100GE access at the client side, OTU2 and OTU4 at the line side;
1) 3C-ONTS8600I series can provide 100G, which help operator build more flexible network with larger bandwidth;
2) 3C-ONTS8600II can provide series 100G function into one equipment, can help operators to reduce the cascaded equipment, power consumption will be lower than before, and the maintenance cost will also be reduced;
3) 3C-ONT8600V series provide end to end service, the service access from the customer, and can direct reach to the core sites such like datacenter, the service only need pass through two transponders, and which will pass through more than 4 transponders before.